Table of Contents
Advertisement
AXIS Q9216–SLV Network Camera
Additional settings
Note
When you turn on power saving mode, the IR illumination range is reduced.
Make sure that AXIS Video Motion Detection is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD).
4. Select Invert this condition.
5. In the list of actions, under Power saving mode, select Use power saving mode while the rule is active.
6. Click Save.
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see page 27.
1. Go to Settings > System > I/O Ports and turn on Supervised I/O.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select Digital input and then select a port.
4. In the list of actions, select Send notification to email and then select a recipient from the list. Go to Recipients
to create a new recipient.
To create a new recipient, click
5. Type a subject and a message for the email.
6. Click Save.
Send an email automatically if someone spray paints the lens
1. Go to Settings > System > Detectors.
2. Turn on Trigger on dark images. This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
Create a rule:
1. Go to Settings > System > Events > Rules and add a rule.
2. Type a name for the rule.
. To copy an existing recipient, click
15
.
Advertisement
Table of Contents
