View And Record Video - Axis 01766-001 User Manual

AXIS Q9216–SLV Network Camera
Additional settings
8. Click Done to exit the guard tour settings.
9. To schedule the guard tour, go to System > Events.

View and record video

To learn more about settings for viewing and recording video, see Streaming and storage on page 19.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select H.264.
2. Go to Settings > Stream.
3. Do one or more of the following:
- Turn on the Zipstream functionality and select the desired level.
Note
The zipstream settings are used for both H.264 and H.265.
- Turn on dynamic GOP and set a high GOP length value.
- Increase the compression.
- Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
View a live video stream on a monitor
Your camera can transmit a live video stream to an HDMI monitor even without a network connection. The monitor can be used for
surveillance purposes or for public viewing, e.g. in a store.
1. Connect an external monitor using the HDMI connector.
2. Change the HDMI settings under Settings > System > HDMI.
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.
11