SNOWJOE sunjoe SWJ599E-RM Operator's Manual

Electric chain saw

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OPERATOR'S MANUAL

A Division of Snow Joe

, LLC

THANKS

OF A REMANUFACTURED PRODUCT.

To make sure you get the most out of

your product, be sure to register online at

to enjoy full product support.

ELECTRIC PRESSURE WASHER

14.5A ELECTRIC PRESSURE WASHER

ELECTRIC CHAIN SAW

CORDLESS AIR COMPRESSOR

2030 PSI MAX PRESSURE

2000 PSI MAX* | 1.6 GPM MAX* | 13-AMP

24-VOLT | 2.0 AH | DIGITAL CONTROL | ADAPTERS

14-INCH | 9-AMP

1.76 GPM MAX FLOW

Model SPX2598-MAX-RM

Model 24V-AJC-LTE-RM

Model SWJ599E-RM

Model SPX3000-RM

FOR

snowjoe.com

PASTE UPC LABEL HERE

AT INITIAL DISCHARGE PER CSA INTERNAL PRESSURE TESTING

WITH NOZZLE OPEN AT MINIMUM PRESSURE

YOUR

Form No. SJ-SPX2598-MAX-RM-880E-V1

Form No. SJ-24V-AJC-LTE-RM-880E-V1

Form No. SJ-SWJ599E-RM-880E-V1

Form No. SJ-SPX3000-RM-880E-V1

PURCHASE

Table of Contents

Need help?

Do you have a question about the sunjoe SWJ599E-RM and is the answer not in the manual?

Questions and answers

Summary of Contents for SNOWJOE sunjoe SWJ599E-RM

Page 1 Form No. SJ-SWJ599E-RM-880E-V1 Form No. SJ-SPX3000-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com to enjoy full product support. PASTE UPC LABEL HERE...
Page 2: Electric Chain Saw
ELECTRIC CHAIN SAW 14-INCH | 9-AMP OPERATOR’S MANUAL OPERATOR’S MANUAL Model SWJ599E-RM A Division of Snow Joe A Division of Snow Joe , LLC , LLC ® ® Form No. SJ-SWJ599E-RM-880E-V1 IMPORTANT! General Safety Safety Instructions WARNING! When using electric yard tools, basic safety precautions should always be followed to reduce the risk of All Operators Must Read These fire, electric shock, and personal injury, including the following:...
Page 3 Chain Saw Use + Care 15. Disconnect tool – Disconnect the chain saw from the power supply when not in use, before servicing, when transporting, or when changing the chain or other Save all warnings and instructions for future reference. The accessories.
Page 4: Electrical Safety
Electrical Safety the proper wall outlet. Do not modify the appliance plug, extension cord receptacle, or extension cord plug in any way. 1. Ground fault circuit interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for 5.
Page 5: Chain Saw Safety Warnings
® ® plastic, masonry or non-wood building materials. Using 1-866-SNOWJOE (1-866-766-9563). This will ensure the chain saw in these incorrect ways could result in that the safety of the power tool is maintained. serious damage to you and your tool.
Page 6 • Ensure safe carrying of the chain saw. Whenever the machine is to be handled or transported, you must: – switch off the motor and wait for the chain to come to a complete stop; – mount the guide bar cover; –...
Page 7: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand Keep bystanders and children a safe and follow all instructions in the distance away.
Page 8: Know Your Electric Chain Saw
Know Your Electric Chain Saw Read the owner’s manual and safety rules carefully before operating your electric chain saw. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Page 9: Carton Contents
+ Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new electric chain saw. The packaging is made of recyclable materials. End cover nut...
Page 10 3. Starting at the tip, mount the chain drive links into the bar groove, leaving a loop at the back of the bar. The chain will Fig. 5 loosely fit until it is placed on the sprocket (Fig. 3). NOTE: Make certain of the direction of the chain. If Chain tensioner the chain is mounted backwards, the saw will vibrate screw...
Page 11: Preparing To Work
7. Remove all slack from the chain by turning the chain 3. Remove the cutting bar and chain from the mounting tensioner screw clockwise until the chain seats snugly surface (Fig. 8). against the bar with the drive links flush inside the bar groove (Fig.
Page 12: Operation
Adjusting the Chain Tension Chain Lubricant WARNING! CAUTION! Before performing any checks, Failure to lubricate the chain will cause damage to the chain and bar. Use a good quality bar and chain adjustments, repairs, or maintenance on the machine, make oil designed specifically for use with chain saws.
Page 13: Operating Tips
Operating Tips 2. Make a loop in the power cord and push it up through the hole in the handle and around the cord restraint hook (Fig. 12), then connect the extension cord to the appliance WARNING! cord. For your safety and that of others: 1.
Page 14 Proper Cutting Stance WARNING! Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called “Raynaud's 1. Weight should be balanced with both feet on solid syndrome” or “white hand”), especially to people suffering ground. from circulation disorders. The symptoms can effect the 2.
Page 15: Cutting Techniques
7. Let the chain do the work; exert only light downward IV) Before starting to fell, consider the natural lean of the tree, pressure. If you force the cut, damage to the bar, chain, or the location of larger branches, and the wind direction to unit can result.
Page 16 • Limbing a tree II) When the log is supported on one end (Fig. 19B), cut 1/3 the diameter from the underside (underbuck). Then make Limbing is the process in which branches are removed from a the finishing cut by overbucking to meet the first cut. fallen tree.
Page 17: Finishing Work
Snow Joe + Sun Joe customer service center ® ® at 1-866-SNOWJOE (1-866-766-9563) for all maintenance Spiked bumper operations not foreseen in this manual. Any operation performed in an unauthorized service center or by unqualified personnel will completely invalidate the warranty.
Page 18: Chain Tension
Snow Joe + Sun Joe dealer or call the Snow Joe ® ® ® Sun Joe customer service center at 1-866-SNOWJOE ® (1-866-766-9563). Cutting edge Sharpening is necessary when: • The sawdust looks like dust. Depth limiter tooth • Cutting becomes more difficult.
Page 19: Guide Bar Maintenance
SWJ599E-RM electric chain saw requires ® saw to distribute the wear for maximum bar life. Feathering or service or maintenance, please call 1-866-SNOWJOE (1-866- burring of the bar rails is a normal process of bar wear. You 766-9563) for assistance.
Page 20: Troubleshooting
Troubleshooting Fault Possible Cause Remedy • Cord not connected to • Make sure that the cord is connected to a the power source power source • Trigger switch not • Check safety lock button is fully depressed prior operational to engaging the trigger switch The motor does not start •...
Page 21: Optional Accessories
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563).
Page 22 NOTES...
Page 23 Certain products may require a serial your state. or guard of your product. All products require a valid proof HOW TO REACH US: of purchase. and Sunday 9AM to 4PM. You can reach us at 1-866-SNOWJOE EXCLUSIONS: (1-866-766-9563), online snowjoe.com, email help@snowjoe.com or tweet us @snowjoe.
Page 24 sunjoe.com...

SNOWJOE sunjoe SWJ599E-RM Operator's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for SNOWJOE sunjoe SWJ599E-RM

Summary of Contents for SNOWJOE sunjoe SWJ599E-RM

Table of Contents