Table of Contents
Advertisement
Enable keyboard password power-on function (JKB)
Note:
1. If using this function, 5VSB line of the power supply should be capable of
delivering enough current for all the devices connected to the keyboard port,
if not, you will be unable to power up the system using the keyboard.
2. If you set JKB with pin2 & pin3 closed, set “POWER ON Function” to “BUTTON
ONLY”, don’t set it to Password, or you’ll be unable to power up your system
by the keyboard or the power button.
3. If you encounter the above problems, clear CMOS and set the jumper and
BIOS option again.
Enable/Disable onboard audio (JSD)(Available on P4N-A P4N-AL
Mainboard)
3
2
1
3
2
1
3
2
1
3
2
1
Advertisement
Table of Contents
