Download Print this page

Product Features; Maintenance - HoMedics MCS-950HJ-GB Manual

2-in-1 shiatsu massage cushion & cordless body massager

Advertisement

PRODUCT FEATURES:

MOVING MASSAGE
MECHANISM
With LED illumination
(glows red when
heat is activated)
INSTRUCTIONS FOR USE:
1. Remove the adapter from the small white box and plug into the input
jack located on the side of the cushion.
2. Plug the unit into a standard 220-240V power supply.
3. Attach the cushion to most chairs for a luxurious massage as you read,
rest, or even work.
4. To begin using your 2-in-1 Shiatsu Massage Cushion & Body Massager
you must first attach the body massager so that you can enjoy the neck
& shoulder massage feature. Take the body massager, stand behind the
cushion and line up the two channels in the back of the body massager
with the two channels at the top of the massager cushion. Next, press
downward and the body massager will slide into place. Once in place,
you can adjust the height of your neck & shoulder massage by grasping
the handle at the top of the body massager and pulling upward until
it locks into the next position. Continue to pull upward until the
massager reaches your desired height. Initially, it may take a few tries to
determine the height that is best for you
5. The neck & shoulder massager detaches from the cushion for use as a
full body massager. To detach, make sure the the cushion's power is
off. Stand behind the massage cushion and grasp the handle at the
top of the neck & shoulder massager. Next, pull upward until the unit
detaches. Once detached you have a cordless body massager that can be
used on your neck, upper back, lower back, and legs. Once the cordless
body massager has been detached, the massage cushion keeps working
separately.
NOTE: The hand control comes with a clear, plastic film to protect the
buttons before use. When you are ready to use your massage cushion,
peel off the plastic film by lifting at one corner and pulling gently.
Discard film.
DETACHABLE BODY MASSAGER
The neck & shoulder massager detaches for use
as a cordless body massager
Power button
CORDLESS BODY MASSAGE INSTRUCTIONS
Shiatsu Massage
To activate the massage action, press the power button once and the
massage nodes will begin to rotate.
Heat
For soothing heat, press the heat button. The massage nodes will glow
red to indicate that the heat has been activated. To turn the heat off, press
again. For your safety, heat will only work when the massage feature is on.
When you need to charge the unit, reattach it to the massage cushion and
plug in the cushion. While charging, there will be a green flashing light on
the hand controller. Once fully charged, the light will be solid green. The unit
should be fully charged after 4 hours of charge time. A full charge will last
approximately 1 hour.

MAINTENANCE:

Cleaning
• Unplug the appliance and allow to cool before cleaning. Clean only with a
soft, slightly damp sponge.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint
thinner etc to clean.
Periodically straighten cord if it becomes twisted.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact with
sharp edges or pointed objects that might cut or puncture the fabric surface.
DO NOT wrap the power cord around the appliance. DO NOT hang the unit by
the cord.
Heat button

Advertisement

loading