Globe Scientific GHS-550HS Quick Start Manual

GHS-550HS
Hotplate Stirrer
Quick Start Guide
What's in the box:
• Quick Start Guide
• Hotplate Stirrer
• Stirring Bar
• Power Cable(s)

INITIAL SETUP

• Unpack the hotplate stirrer and place on a
stable, temperature resistant surface.
• Ensure the location of the hotplate stirrer is
clean and free of explosive, flammable and
hazardous substances.
• Place the hotplate stirrer at least four inches
(4") from the wall or any other items.
• Keep the hotplate stirrer away from the
effects of high magnetic fields.
• Never cover the hotplate stirrer.
• Ensure that the power cord does not make
contact with the hotplate or melting and
exposure to dangerous voltages can occur.
• Do not operate the hotplate stirrer with a
damaged power cord.
• Connect the power cord to the appropriate
voltage power outlet.

EXTERNAL SENSOR INSTALLATION (OPTIONAL)

1) Install the sensor support stand on the rear of the unit.
2) Connect the external sensor plug into the appropriate port on
rear of the unit.
3) Secure the external sensor into the support stand.
4) Ensure that the external sensor is at least one inch (1") from
the bottom of the vessel.
GHS-550HS with
optional temperature
sensor and support
stand installed.
Continued . . .