Table of Contents
Advertisement
aus Basic settings
Basic setting
Time light
Start programme
Tone volume
Button volume
Efficient Dry
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Press
.
1.
To open the basic settings, press
2.
for approx. 3 seconds.
Press
repeatedly until the display
3.
shows the required setting.
36
Selection
1
on
off
Auto Wash
1
Last programme
Scale with multiple
levels.
Scale with multiple
levels
off
On in all programmes
Auto Wash
on
off
off
Manual
Permanent
1
on
off
Reset
Description
Switch "Time light" on or off.
While the programme is running, status informa-
tion is projected onto the floor below the appli-
ance door, e.g. the remaining running time. If the
base panel is pulled forwards or if the appliance
is installed at eye level with the cabinet front fit-
ted flush, the display is not visible.
Set a default programme for when the appliance
is switched on.
Set the signal volume at the end of the pro-
gramme.
Level 0 switches the signal tones off.
Set the button volume during operation.
Level 0 switches the button tones off.
Activate or deactivate automatic opening of the
1
appliance door during the drying phase.
→ "Efficient Dry", Page 12
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the Home Connect
app.
→ "Home Connect ", Page 37
Activate or deactivate
→ "Remote Start
This basic setting is not available until after you
have connected the device with the Home Con-
nect app.
→ "Home Connect ", Page 37
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
Press
4.
display shows the right value.
You can change several settings.
To save the settings, press
5.
approx. 3 seconds.
", Page 38.
or
repeatedly until the
for
Advertisement
Table of Contents
