Table of Contents
Advertisement
MAKING NETWORK CONNECTIONS
3.4.2 AUI Interface
Type:
Pin 1
Logic Ground
2
Collision +
3
TX +
4
Logic Ground
5
RX +
6
Logic Ground
7
No Connection
8
Logic Ground
3.4.3 AUI Cable Requirements
• Type - The AUI cable connecting the adapter to a transceiver
must be Ethernet Version 1, Version 2, or IEEE 802.3, 10BASE-5
type cable that matches the device attached to the AUI port.
• Length - The AUI cable must not exceed 50 meters (164 feet) if
24 AWG AUI cable is used. If 28 AWG AUI cable is used, then
the maximum cable length is 16 meters (52 feet).
Page 3-10
15 position D type receptacle
Pin 9
Collision -
10
TX -
11
Logic Ground
12
RX -
13
Power (+12 Vdc)
14
Logic Ground
15
No Connection
Shell Protective Ground
Advertisement
Table of Contents
