Do you have a question about the S1232ER and is the answer not in the manual?
Questions and answers
Stephen
April 3, 2025
Lawnmower got wet from rain and now won't start
1 comments:
Mr. Anderson
April 3, 2025
The Spear & Jackson lawnmower S1232ER is not designed for use in wet weather or on wet grass. If it gets wet from rain, moisture may affect the electrical components, which can prevent the mower from starting.
This answer is automatically generated
Stephen
April 3, 2025
My lawnmower won't start
1 comments:
Mr. Anderson
April 3, 2025
The Spear & Jackson lawnmower S1232ER may not start due to the motor thermal protection device being triggered. This happens if the motor or blade shuts down or gets blocked during operation. To restart:
1. Release the switch lever. 2. Disconnect the extension lead. 3. Check for blockage and clean the cutting chassis. 4. Let the machine cool down for about 5 minutes in a cool environment.
Also, ensure the grass is not wet or unusually high, and the mower is used only under dry conditions.
Page 1
IN THE BOX QUICK START GUIDE 32cm 1200W Rotary Electric Lawnmower S1232ER Switch box Cable clip Switch bar Screws x2 Upper handle Height adjusting handle Lower handle Wheel Wing nut Power cable Full grass indicator Roller Important - Please read these instructions...
Page 2
ASSEMBLE PREPARE 60 mm 20 mm Locate the lower handle into deck, Fit the upper handle, lower handle Connect the plug to the main socket. Press the button (1). Pull the switch When you begin to mow please follow i. Push the adjusting lever out of the and fix it with 2 screws.
Need help?
Do you have a question about the S1232ER and is the answer not in the manual?
Questions and answers
Lawnmower got wet from rain and now won't start
The Spear & Jackson lawnmower S1232ER is not designed for use in wet weather or on wet grass. If it gets wet from rain, moisture may affect the electrical components, which can prevent the mower from starting.
This answer is automatically generated
My lawnmower won't start
The Spear & Jackson lawnmower S1232ER may not start due to the motor thermal protection device being triggered. This happens if the motor or blade shuts down or gets blocked during operation. To restart:
1. Release the switch lever.
2. Disconnect the extension lead.
3. Check for blockage and clean the cutting chassis.
4. Let the machine cool down for about 5 minutes in a cool environment.
Also, ensure the grass is not wet or unusually high, and the mower is used only under dry conditions.
This answer is automatically generated