Table of Contents
Advertisement
User Manual EtherCAT Slave / Modbus Slave
Document code: MN67E02_ENG
Revision 1.000
Page 15 of 29
Industrial Electronic Devices
USE OF COMPOSITOR SW67E02:
To configure the Converter, use the available software that runs with Windows called SW67E02. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67E02, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67E02
ADFweb.com S.r.l.
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67E02-2-A1 and is the answer not in the manual?