Safety Instructions - Honeywell POWER TURBO HS-830 Series Owner's Manual

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic safety
precautions should
always be followed,
including the following:
1. Use this fan only as
described in this manual.
Other use that is not rec-
ommended may cause
fire, electric shock or
injury.
2. This product is intend-
ed for household use
ONLY and not for com-
mercial, industrial or out-
side use.
3. To protect against
electrical shock, do not
place fan in window,
immerse unit, plug or
cord in water or spray
with liquids.
4. This fan is equipped
with a polarized alternat-
ing current line plug (a
plug having one blade
wider than the other).
This plug will fit into the
power outlet only one
way. This is a safety fea-
ture. NEVER connect the
fan to any power source
other than a 120 volt
alternating current polar-
ized outlet. If you are
unable to insert the plug
fully into the outlet, try
reversing the plug. If the
plug should still fail to fit,
contact an electrician to
replace the obsolete out-
let. Do not defeat the
safety purpose of the
polarized plug.
5. Close supervision is
necessary when any
appliance is used by or
near children.
6. Unplug the fan from
the outlet when not in
use, when moving fan
from one location to
another and before
cleaning.
7. Do not operate the fan
in the presence of explo-
sive and/or flammable
fumes.
8. Do not place the fan or
any parts near an open
flame, cooking or other
heating appliance.
9. Do not operate the fan
with a damaged cord or
plug, after a malfunction
or if dropped or damaged
in any manner. (See war-
ranty.)

SAFETY INSTRUCTIONS

10. Avoid contact with
moving fan parts.
11. To disconnect, grip
the plug and pull it from
the wall outlet. Never
yank the cord.
12. The use of attach-
ments not recommended
by the manufacturer may
be hazardous.
13. Always use on a dry,
level surface.
14. Do not hang or mount
fan on a wall or ceiling.
15. Do not operate if the
fan housing is removed
or damaged.
16. A loose fit between
the AC outlet and plug
may cause over heating
of the plug. Have a quali-
fied electrician replace
outlet.
WARNING: To reduce the
risk of fire or electrical
shock, do not use this
fan with any solid state
speed control device.