Operation - Honeywell POWER TURBO HS-830 Series Owner's Manual

Fig. 1
B
• Place Base (A) on floor.
Align end of Pole (B) into
groove on topside of
base. Place Handscrew
(C) into slot on bottom of
Base and turn it clock-
wise until tightened
(Fig.1)
• Place your fan on a
level and dry surface.
• Plug the power cord
into a polarized 120 Volt
AC wall outlet.
• Adjust the tilt head to
desired angle. For maxi-
mum room air circulation,
tilt head 90° backwards
to use as air circulator
(Fig.4).
A Fig. 2
C
• Slide base of Head
Assembly (D) into groove
on top of pole until fully
mounted (Fig.2).
• Adjust the speed con-
trol to the desired setting:
High (III), Medium (II),
Low (I) (Fig. 5).
• To move, unplug fan. Tilt
head into upright posi-
tion. Use hidden carrying
handle on back of head.
ASSEMBLY INSTRUCTIONS
D
• Push Head Clip (E) up
into slot on back of Head
Assembly to lock it into
place.
Fig.4
Fig. 5
E
Fig. 3

OPERATION