Command Overview - Vanderbilt CD30 Codoor Configuration Manual

Command overview

13 Command overview
Command
Change Administrator code
Change Administrator
code
(Present Administrator
code is known)
Change Administrator
code
(Present Administrator
code is not known)
Change Group code
Enter Group code
Change group code
Delete Group code
Unlock/Lock door
Unlock door
Lock door
Buzzer enable/disable
Disable buzzer
Enable buzzer
Erase memory
Erase memory
20
Vanderbilt International (IRL) Ltd.
1. 2.
Press B. Enter the
6-digit Admin-
istrator code.
Remove the Press quickly
CD30 from the reset but-
the door. ton on the
back of the
CD30.
Press B. Enter the
6-digit Admin-
istrator code.
Press B. Enter the
6-digit Admin-
istrator code.
Press A1A. Enter the
group code
stored as the
9th code (four
digits).
Press A0A. Enter the
group code
stored as the
9th code (four
digits).
Press B. Enter the
6-digit Admin-
istrator code.
Press B. Enter the
6-digit Admin-
istrator code.
Remove the Press the re-
CD30 from set button on
the door. the back of
the CD30.
3. 4.
Press A27. Enter a new
6-digit Admin-
istrator code.
Enter the de- Verify by en-
sired 6-digit tering the
Administrator same Admin-
code. istrator code
again.
Press A21. Enter the de-
sired 1-digit
code number
(1-9).
Press A21. Enter the de-
sired 1-digit
code number
(1-9)
Press A65. To enable
press 0.
Press A65. To disable
press 1.
Press Press
112186. 112186.
5. 6.
Verify by en- Make a note
tering the of the Admin-
same Admin- istrator code.
istrator code
again.
Make a note
of the Admin-
istrator code.
Enter the de- Press B to
sired 4-digit enter the Ad-
Group code. ministration
mode.
Enter 0000. Press B to
enter the Ad-
ministration
mode.
Press B to
leave the Ad-
ministration
mode.
Press B to
leave the Ad-
ministration
mode.
7.
Press B to
leave the Ad-
ministration
mode.
Press B to
leave the Ad-
ministration
mode.
05.2016