Yamaha DRIVE 2 SUPER HAULER 2019 Owner's/Operator's Manual page 21

CONTROLS
TOW SWITCH
A
Before operating the car, make
sure the tow switch is in the "RUN"
position.
å Tow switch
NOTICE
Ensure that the "Drive Select
Switch" is in the "FWD" position
and then move the "TOW Switch"
to "TOW" before towing.
Y-1995
After moving switch from "RUN" to
"TOW," wait 15 seconds minimum
before switching again. Failure to
5
do so may lead to drive system
damage while towing.
HEADLIGHT/TAILLIGHT
ON POSITION
OFF ON
Turn the main switch all the way to
BATTERY
the right to the second ON position.
This will activate the headlights and
Y-2840
taillights.
USB PORTS
A USB port is located inside the dash
on the driver side and passenger
side. These can be used to power or
charge USB devices or accessories.
The USB is only powered when the
key is in the ON position.
1 USB port
Y-2932
5-5
J2F