Yamaha DRIVE 2 SUPER HAULER 2019 Owner's/Operator's Manual page 16

! SAFETY CONSIDERATIONS
SAFETY PRECAUTIONS
DURING MAINTENANCE
When performing maintenance,
follow all safety instructions contained
in the manufacturer's operation and
service manuals, as well as the
following safety procedures:
• Properly immobilize Super Hauler
before beginning any maintenance
to avoid any unexpected vehicle
4
movement.
• Properly block chassis before
working underneath Super Hauler
to avoid any unexpected vehicle
movement.
• When working on the battery, do
not smoke, or allow any sparks or
open flames near the vehicle, to
avoid any fires or explosions.
• Before working on an electric
vehicle, disable the car's electrical
system in accordance with the
manufacturer's instructions to avoid
electrical shock or damage to the
electrical system.
• Use only properly insulated tools
when working on electrically
powered vehicles or around
batteries to avoid electrical shock or
damage to the electrical system.
• Maintain all safety devices including
brakes, steering mechanisms,
warning devices and governors,
in a safe operating condition. Do
not modify these safety devices as
supplied by the manufacturer.
• After each maintenance or repair,
the car must be driven by a
qualified, trained and authorized
person – in an area free of
pedestrian traffic – to ensure proper
operation and adjustment.
4-3
• Record all maintenance performed
in a maintenance record log by
date, name of person performing
maintenance and type of
maintenance. Periodically inspect
maintenance log to ensure accurate
and complete entries.
• Provide operator comment cards
to assist in identifying non-periodic
maintenance needs for specific
Super Haulers.
• Maintain, in a legible condition,
all nameplates, warnings and
instructions provided by the
manufacturer.
• If new nameplates, warnings or
instructions are needed, contact
your Yamaha dealer.
STORAGE AND
BATTERY CHARGING
Take the following precautions to
ensure maintenance worker safety:
• Only use battery changing and
charging facilities and procedures
that are in accordance with applic-
able ordinances and regulations to
avoid explosions, electrical shock
or damage to the electrical system.
• Periodically inspect charging facili-
ties and procedures to be certain
that applicable safety codes,
regulations and procedures are
being followed to avoid any fires or
explosions.
J2F