Advertisement
A
NEUVIDEO
Front Panel
w
e
t y
LAN:
Connects to an active network for LAN and Telnet/ Web GUI control. When the transmitter or any compatible LAN equipped
q
receivers are connected to a network, this allows the network access (including internet access if available) to be shared between the
transmitter and all connected receivers. Connect any Ethernet equipped device e.g. a Smart TV or game consoles to the LAN port of a
receiver for that device to share the network/internet access.
RS-232 OUT:
This slot is to connect the D-Sub 9-pin cable from device equipment to receive RS-232 commands.
w
POWER LED:
This LED will illuminate when the device is connected to a power supply.
e
LINK LED:
This LED will illuminate when both the CAT5e/6 input and output signals are connected.
r
IR1 EXTENDER:
This slot is to connect with the IR Receiver cable, included in the package, for IR signal receiving.
t
IR2 BLASTER:
This slot is to connect with the IR Blaster cable, included in the package, for IR signal transmitting.
y
HDMI OUT:
This slot is to connect with a HDMI TV/monitor for display HDMI input source signal.
u
BACK Panel
CAT5e/6/7 IN:
Connects from the HDMI to the CAT5e/6/7 Transmitter for signal displaying.
q
q
r
u
3
HARDW ARE DESCRIPTION
Advertisement
