Table of Contents
Advertisement
2.
Set a cooking time using the rotary selector.
1
i
Press the start button.
3.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
Changing the cooking time
This can be done at any time. Change the cooking time using the
rotary selector.
Memory
You can save the settings for a dish in the memory and call it up
again at any time.
The memory is useful for if you frequently prepare a specific dish.
Saving memory settings
Example: 360 W, 25 minutes
i
Press the
button.
1.
"M" appears in the display.
Press the required microwave power setting.
2.
"M", the selected power setting and "1:00 min" appear in the
display.
Set the cooking time using the rotary selector.
3.
i
Confirm by pressing the
4.
The clock reappears. The setting is saved.
Notes
You cannot save several microwave power settings one after
■
the other.
You cannot save automatic programmes.
■
You can save the memory settings and start the appliance
■
immediately. When finishing, instead of pressing
"start".
Saving a new setting in the memory: press the
■
old settings appear. Save the new programme as described in
steps 1-4.
24
22
i
button.
i
, press
i
Pausing
Press the Stop button once, or open the appliance door. After
closing, press the Start button again.
Cancelling operation
Press the Stop button twice, or open the door and press the Stop
button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
Cooling fan
The appliance is equipped with a cooling fan. The fan may run on
even if the oven has been switched off.
Notes
The cooking compartment remains cold during microwave
■
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Starting the memory
It is very easy to start the saved programme. Place your meal into
the appliance. Close the appliance door.
Press the
1.
The saved settings are displayed.
Press the start button.
2.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
Pausing
Press the Stop button once, or open the appliance door. After
closing, press the Start button again.
Cancelling the setting
Press the Stop button twice, or open the appliance door and press
the Stop button once.
button. The
i
button.
Advertisement
Table of Contents
