Entering And Using Programs - Sharp FACSIMILE User Manual

Entering and Using Programs

Entering and Using Programs
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
♦
Rapid Keys 16/P1 and 17/P2 can be used as Program Keys. However, a key
cannot be used if it is already being used for Rapid Key Dialling.
♦
Only Speed Dial numbers can be used to enter fax numbers of receiving
machines in the Program Keys. Full numbers cannot be entered.
♦
If the program is for a regular transmission or polling operation, a timer setting can
be included to have the operation performed automatically at a selected time.
♦
To clear a mistake, press the STOP key.
Initial procedure
To program a Program Key, first
perform the following procedure.
After you have completed this
procedure, go to the procedure for
the specific operation you want to
program (see the following pages).
1
Press these keys:
FUNCTION
PRG.ENTRY MODE
2
Press 1 to select SET.
1
3
Select a Program Key ("16/P1" or
"17/P2") to select it.
16/P1
or
35
134
7
17/P2
36
4
Enter a name for the program by
pressing the letter entry keys. (If
you don't want to enter a name, go
directly to Step 5.)
7
7 7
4 4
7
7
5
Press the START key.
7 7
4 2 2
SPEAKER
7 7 7 7
Example: SHARP
START