Select Tv Output - Abit Siluro GF4 MX Series User Manual

All manuals and user guides at all-guides.com
4-22
Video output format: Lets you specify the type of output signal sent to the
TV. If you have the proper connector cable, S-Video out will generally
provide a higher quality output than Composite video out. If you are not sure
which type of signal you should specify, choose the Auto-select setting.
Check here if you have a TV connected but it remains unselectable: Select
this option to force the detection of a TV connected to the graphics card, even
though the control panel does not show that one is currently connected. This
useful in situations where the particular TV model attached does not properly
load the signals that allow the graphics card to detect its presence. To enable
the TV settings: Click the check box, then restart your computer when
prompted. Once you log back in, you can use the TV controls.
Device Adjustment: Opens a window where you can customize the settings
for the active display device. (For Analog Display, refer to "Screen
Adjustment" and "Display Timing" on page 4-26; for TV Display, refer to
"TV Output" on page 4-24.)

Select TV Output:

1. Select "nView Display Mode" tab
and click "Device Settings>>"
"Select Output Device" "TV".
Siluro GF4 MX Series
Click "Apply".
2.
Chapter 4