Advertisement
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of
the product described in this manual. Failure to comply may invalidate the warranty and cause property damage
or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be installed in the
rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the rack without the original packing materials may cause product
damage that may affect the warranty.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended.
A
Upright
x2
F
3/8" X 7/8" Washer
x20
#12-24x5/8" (Cylindrical)
x28
Parts List
B
Base Plate
x2
G
3/8"-16 Nut
x8
x14
(SR2POST)
Equipment Mounting Hardware
#12-24x5/8" (Conical)
x28
C
Top Support Rail
x2
x14
(SR2POST)
H
#8-18T-1/2"
x4
x8
(SR2POST13)
(SR2POST25)
Washer (Black)
x28
2
D
Cable Hook
x4
x8
(SR2POST13)
(SR2POST25)
Required Tools
• 9/16" Wrench
• 9/16" Socket Wrench (Ratcheting)
• Cross-Head Screwdriver
Washer (White)
Washer (Countersink)
x28
E
3/8"-16 X 1
x12
x28
Advertisement
