Assembling/Disassembling The Union Nut (Poland / Austria); Navigating In The Menu - Silvercrest 368308 2010 Short Manual

Assembling/Disassembling the Union
Nut (Poland / Austria)
In the case of supplies to Poland and Austria, the union
nut (1) is not preassembled. Use the thread gauge sup-
plied to determine which union nut (1) must be assembled
on the radiator valve.
1.
Slide the union nut (1) on the radiator valve until you
hear a distinct "click" and the union nut (1) can be
rotated freely.
If the union nut (1) is fitted the wrong way around on the
radiator valve, the union nut (1) can be simply screwed
off and then fitted the right way around.
If the wrong union nut (1) is fitted, the union nut (1) must
be removed as described below:
1.
Use a flat object, e.g. a screwdriver, to press lightly
on the rim of the device.
2.
Pull the union nut (1) off.
7.

Navigating in the Menu

Press the Mode/Menu button (5 b), and keep it
pressed, to open the menu.
Turn the Rotary knob (9) to select the function re-
quired.
Press the Rotary knob (9) to activate the function. You
can use the Rotary knob (9) to change the settings.
Press the Rotary knob (9) to confirm your input.
Following 30 seconds without any input, the display
switches back to the main screen.
DISPLAY Explanation
Timer programme
Current valve position
27
Gi