Belkin F1DN-MOD-MOUNT Quick Installation Manual

Quick Installation Guide
Belkin Secure Modular KVM/KM Switch Under Desk Mounting Bracket Guide
The Belkin Secure Modular KVM/KM Switch Under Desk Mounting Bracket is designed for quick deployment and attaches to the KVM/KM via tension to two 90 degree
brackets. There are no screws required to fasten the KVM/KM to the bracket. The unit can be secured using the included cable ties around each or several host and
console cables. In addition, each cable that attaches to the KVM/KM comes with Velcro tie wraps that can be used to secure the unit to the mount and signify the enclave
connected by color. See illustration 1 for full details.

Included Contents:

• Under Desk Mounting Bracket
• Screw - 6 x 3/8" Hex Washer Head Phillips Steel Qty 6
• Drill Template
• Cable Tie 3.2x140mm Nylon Black Qty 8
• 1 QIG (Quick Installation Guide)

Pre-Installation Guidelines

• Determine where you will be mounting the bracket and the orientation of the bracket. (see below)
KVM Mounting Options
• Ensure the bracket will be installed on a flat, clean, and dry surface. This bracket is not intended for exposed outdoor installation.
• Ensure that maximum distance between the KVM/KM bracket and each computer does not exceed your cabling lengths.
• Ensure that the keyboard, mouse, and display cables will reach the mounted KVM/KM.
• Ensure that once the mount is installed the keyboard, mouse, and remote control can be inserted.
• Ensure that the KVM/KM included remote control buttons are easily visible and accessible by the intended user and the cable length is not exceeded.
© 2020 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers
F1DN-MOD-MOUNT
Belkin Modular KVM Under Desk Mount
For models: F1DN102-BA-4, F1DN202MOD-BA-4, F1DN104MOD-BA-4, F1DN204MOD-BA-4, F1DN002KM-4, and
F1DN004KM-4
Illustration 1
F1DN-MOD-MOUNT 8820-03128 Rev.A00