Magtek Dynamag Programmer's Reference Manual page 15

2 - How to Set Up the MagTek SCRA Libraries
13) Use the host software to test swiping a card. If you do not yet have host software and the device is
configured to run in KB mode, open any text editor and swipe a card. The card contents should
appear in the text editor.
14) The device consumes very little power when not transmitting card data, so it is not necessary to
power off the device to conserve power. If the device appears as
list of Bluetooth devices, swiping a card should cause the device to reconnect briefly, transmit the
card data, then disconnect.
15) Remember to change the default password. See the DynaMAX Programmer's Reference documents
for details.
To unpair from the device:
1) Locate the device in the
Press the Remove device
Dynamag, DynaMAX, and eDynamo| Secure Card Reader Authenticator | Programmer's Reference (WCF)
Page 15
Manage Bluetooth devices
button.
Not connected
window.
in the Windows