Magtek Dynamag Programmer's Reference Manual page 13

2 - How to Set Up the MagTek SCRA Libraries
Figure 2-1 - Launch Manage Bluetooth Devices App from Desktop Mode
9) Locate the serial number on the label on the bottom of the device. Note the final four digits.
10) Read through the list of pairable devices and locate the device called
, where nnnn is the last four digits of the device's serial number (if the device does
eDynamo-nnnn
not show in the list, power it off then power it back on). Below the device name you should see the
text
Ready to pair
11) Select the device and press the
will prompt you
Enter the passcode for your keyboard
Dynamag, DynaMAX, and eDynamo| Secure Card Reader Authenticator | Programmer's Reference (WCF)
Page 13
Figure 2-2 – Windows 8 Manage Bluetooth Devices App
.
Pair button. If the device is configured to run in KB mode, Windows
DynaMAX-nnnn
.
or