Gigaset GS180 Manual page 78

Connecting a device to the WLAN hotspot
Showing the network name and password on the smartphone:
¤
Settings
Wi-Fi hotspot
Connecting to the hotspot on the other device:
¤
Open the list of WLANs within range
hotspot Enter the password for the hotspot
Setting up and using Bluetooth tethering
Share the Internet connection with other devices via Bluetooth.
The mobile data connection is active
¤
Carry out pairing between the smartphone and the device with which you want to share the
Internet connection (
¤
Set up the other device so that it establishes a network connection over Bluetooth. For more
information, read the instructions for the device.
Enabling and disabling the Internet connection of the phone via Bluetooth tethering:
¤
Settings
Bluetooth tethering function with the switch . . . You can now establish an Internet
connection with the other device
Setting up and using USB tethering
Share the Internet connection with another device over a USB cable.
The mobile data connection is active
¤
Use a USB cable to connect the smartphone to another device . . . The
displayed in the Notifications bar
USB for file transfer or USB for photo transfer is set (
Enabling/disabling USB tethering:
¤
Settings
tethering function with the switch . . . You can now establish an Internet connection with the
other device
When USB tethering is enabled, the
USB tethering is disabled permanently if you unplug the USB cable.
USB tethering is not available on Mac computers.
78
Network & Internet
Tap Show password . . . The network name and password are displayed
p. 74)
Network & Internet
Network & Internet
Hotspot & tethering
Select network with the network name of the
Connect.
p. 73
Hotspot & tethering
p. 73
Open message over USB connection and ensure that
Hotspot & tethering
icon is displayed in the Notifications bar.
Wi-Fi hotspot
Enable/disable the
USB icon is
p. 34)
Enable/disable the USB
Set up