Gigaset GS180 Manual page 10

Inserting the battery
¤
Insert the battery into the device with the connector
contacts facing forwards
downwards into the battery compartment.
Removing the battery:
¤
To change the battery, place your fingernail into the
recess on the right of the battery compartment
1
and pull the battery up.
Closing the cover
¤
Align the cover with the side tabs on the slots on the inside of the casing.
¤
Press the cover until it clicks into place.
Charging the battery
¤
Plug the Micro-USB connector of the charger cable
provided into the Micro-USB socket of the
smartphone
¤
Connect the power adapter to the USB connector of
the charger cable and connect it to the power source.
The device is charged once the charge icon
Status bar is filled completely.
So your phone does not discharge during set-up, keeping it connected to the power
is recommended until set-up is complete.
Switching on the device
¤
Keep the On/Off button pressed until the device vibrates.
When you are requested to unlock the SIM card,
¤
use the keypad to enter the PIN of the SIM card
When switching on the device for the first time, a wizard starts which guides you through the
initial configuration.
10
Insert the battery
in the