To Connect A Projector - Sony PCG-VX88 VAIO User Guide (primary manual) User Manual

To connect a projector

1 Turn off the computer before you connect the projector.
2 Locate the VGA (Monitor)
3 Plug the display cable (not supplied) into the VGA port, and plug the
opposite end into the appropriate port on the projector.
4 Plug the audio cable (not supplied) into the Headphone jack, and plug the
opposite end into the appropriate port on the projector.
5 Verify that the power cord is plugged into the projector and an AC outlet.
6 Turn on all external devices before you turn on the computer.
Connecting a Projector
To VGA port
Display cable
(not supplied)
Power cord
✍
See the manual that came with your projector for more information on its installation
and use.
Connecting an External Display
port and the Headphone
Projector
jack.
To Headphone jack
Audio cable
(not supplied)
67