Troubleshooting Audio; My Speakers Have No Sound - Sony PCG-VX88 VAIO User Guide (primary manual) User Manual

Change text in this variable definition to document title.

Troubleshooting Audio

My speakers have no sound.

❑ If the built-in speakers are turned off, press Fn+F3 or use the center Jog
Dial™ Control to turn on the speakers.
If the speaker volume is turned to the minimum, press Fn+F4, and then press
❑
Up Arrow
use the center Jog Dial Control to adjust the volume.
❑ If nothing is displayed when you press Fn+F3 or Fn+F4, follow these steps:
1 Right-click the Volume
Properties.
2 Select the Audio tab, and click Advanced in the Sound Playback box.
The Advanced Audio Properties dialog box appears.
3 Make sure the Speakers tab is open and the correct speaker setup is
selected in the Speaker Setup box.
Check the volume controls in the Windows® taskbar.
❑
1 Right-click the Volume
Control. The Volume Control dialog box appears.
2 Make sure the mute check boxes are not selected. If they are selected,
click the check box to cancel the selection.
3 Close the Volume Control dialog box.
Make sure the CD audio enable is turned on
❑
1 Click Start on the Windows® taskbar, and then Control Panel.
2 Click Performance and Maintenance, and then System. The System
Properties dialog box appears.
3 Select the Hardware tab, and then click Device Manager. The Device
Manager dialog box appears, listing your computer hardware devices.
4 Double-click DVD/CD-ROM drives.
5 Double-click the listed drive name.
6 Click the Properties tab.
132
or Right Arrow keys to increase the volume. You can also
icon on the taskbar, and select Adjust Audio
icon on the taskbar, and select Open Volume