To Connect A Projector - Sony VAIO User Manual

To connect a projector

1 Turn off the computer before you connect the projector.
2 Locate the VGA (Monitor)
3 Plug the display cable (not supplied) into the VGA port, and plug the
opposite end into the appropriate port on the projector.
4 Plug the audio cable (not supplied) into the Headphone jack, and plug the
opposite end into the appropriate port on the projector.
5 Verify that the power cord is plugged into the projector and an AC outlet.
6 Turn on all external devices before you turn on the computer.
Connecting a Projector
T o V G A p o r t
D i s p l a y c a b l e
( n o t s u p p l i e d )
See the manual that came with your projector for more information on its installation
and use.
port and the Headphone
P r o j e c t o r
P o w e r c o r d
Connecting an External Display
jack.
T o H e a d p h o n e j a c k
A u d i o c a b l e
( n o t s u p p l i e d )
61