To Connect A Projector - Sony PCG-SRX87 VAIO User Guide (primary manual) User Manual

Change text in this variable definition to document title.

To connect a projector

You can use a projector as an external display, such as the Sony LCD Projector.
You can connect a projector using the supplied Display adapter.
1 First make sure the port replicator is connected to the computer.
2 Plug one end of the VGA signal cable (not supplied) into the port
replicator's Monitor port, and the other end into the projector's
corresponding port.
3 Plug the audio cable into the Headphone
Connecting a Projector
Display adapter
60
Computer
Power cord
VGA signal cable
(not supplied)
jack.
Projector
Audio cable
(not supplied)
to
Headphone
jack