Setting Up The Lra-900 - ICP DAS USA LRA-900 User Manual

3.2. Setting up the LRA-900

After installing the utility tool, please follow the following steps to set up the
communication between the Utility and the LRA-900.
Step 1: Connect the PC available COM port with the RS-232 port of the LRA-900
device via CA-0910 cable. Users can find the communication cable
(CA-0910) in the product box.
Step 2: Set the LRA-900 'Init.' Dip switch to 'On' position and reboot the module.
After rebooting, the module's RF_Tx and RF_Rx led will flash ON/OFF per
second.
LRA-900 (RS-232/RS485 to LoRa Radio Modem) User Manual
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved
Version 1.0.1
E-mail: service@icpdas.com
13
Page：