Operation; Removing/Inserting The Battery; Checking The Charge Status; Of The Rechargeable Battery - Parkside PAP 20 B1 Translation Of The Original Instructions

GB CY

Operation

Removing/inserting
the Battery
Only insert the re-
chargeable battery
once the battery-
operated tool is
ready for use.
Risk of injury!
1. To remove the battery (4)
from the appliance, press the
release button (1) on the bat-
tery and pull out the battery.
2. To insert the battery (4),
place it on the guide track
and push it into the appli-
ance. it will audibly snap in.
Checking the charge
status of the re-
chargeable battery
The battery charge status indi-
cator (3) signalises the state of
charge of the battery (4).
10
Press the button (2) on the bat-
tery. The state of charge of the
battery is displayed by illumi-
nating the 3-colour LED lights of
the state of charge display.
3 Leds light up
(red, orange and green):
Battery is fully charged.
2 Leds light up
(red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery
(4) when the red LED on
the charge status indica-
tor (3) is on.

Used batteries

• If a fully recharged bat-
tery lasts for considerably
shorter operating times,
the battery is used up and
needs to be replaced. Only
use an OEM battery pack
replacement available from
our Customer Service.