Catalog What is in the box......................2 Product Introduction....................2 Specifications......................3 Product features......................3 Product Illustration..................... 4 Installing the hard disk....................5 Attention........................8 Remove the Device..................... 8 Hard-drive Format Partition Operation..............8 Failure Solutions......................12 Notice.......................... 12 Declaration......................... 13 FCC..........................
Customer Care Team if any Further Concern. Thank you very much. Product Introduction The 35U3 series series is a desktop storage external hard dirve enclosure, The full range is made of aluminum alloy and is durable. Fully compatible with 2.5-inch and 3.5-inch HDD/SSDs.
Specifications Model 3529U3 / 3549U3 / 3559U3 Material Aluminum Alloy Output USB3.0 Type-B Transmission Rate 5Gbps Data Cable USB Type-A/M to USB Type-B/M Compatible Drive 2.5 & 3.5 Inch SATA HDD / SSD Supported System Windows / Mac OS / Linux 3529U3: 234(L)×135(W)×...
Product Illustration 3529U3 ① ② ③ ④ ⑤ ① LED Indicator ② Bay ③ Power Interface ④ USB3.0 Interface ⑤ Power Switch 3549U3 ① ② ③ ④ ⑤ ① LED Indicator ② Bay ③ Power Interface ④ USB3.0 Interface ⑤ Power Switch - 4 -...
3559U3 ① ② ③ ④ ⑤ ① LED Indicator ② Bay ③ Power Interface ④ USB3.0 Interface ⑤ Power Switch Installing the hard disk 1. Push the slip buckle in the left direction,auto-pop tray handle. - 5 -...
Page 7
2. Grab the handle and pull out the tray. 3. Install the 2.5 " /3.5" SATA HDD/SSD ,secured with screws. 2.5" hard drive(bottom 4 screws fixed) - 6 -...
Page 8
3.5" hard drive(4screws fixed on both sides) 4. Load the tray into the hard drive enclosure and complete the hard drive installation. - 7 -...
You need to initialize and format the partition first, otherwise it won't work properly. If it is a brand-new hard drive, please initialize and format the partition according to the following steps: 1.Please ensure the ORICO enclosure is installed properly, and connected to the computer. - 8 -...
Page 10
2.Right click “My Computer”, then select “Computer Management”, tap or click “Disk Management” on the left side of the window when “Computer Management” opens, then select “MBR” or “GPT” partition form and click “OK” Note: ・If the disk capacity is less than 2TB, please use MBR partition form to initialize the hard disk.
Page 11
(4)When setting the capacity of disk partition, can customize the partition capacity, or set the default maximum simple volume size, and there will be only one disk partition. (5)Allocating the drive letter and path, (e.g. Explorer, C, D, E, F, G drive) drive letter. - 10 -...
Page 12
(6)Format partition, able to set file system format (NTFS, FAT32 or exFAT), assign unit size (default set), volume label name, recommend "perform quick format", and click "next" when configuration is completed (7)Click "finish" to perform the final step of formatting partition. - 11 -...
(8)It will take 5-30 seconds, and the new partition drive letter will be displayed in the explorer after formatting. Failure Solutions If the product appears in the case that the computer cannot recognize the hard disk, it can be excluded by the following methods: ·...
Declaration ORICO Technologies Co., Ltd., all rights reserved. Thank you so much for purchase ORICO product. Please refer to this manual when using orico product or experienced issues. Additionally, please kindly contact ORICO customer care team if any concern. ORICO® is registered trademark of ORICO TechnologiesCo., Ltd.. Any other product, trademark, service or company mentioned herein is trademark or registered trademark of the respective owners.
Page 15
ORICO Technologies Co.,Ltd. Hotline: 400-6696298 Tel: 86-755-25196059 Website: www.orico.cc E-mail: supports@orico.com.cn Company Add: 19/F, Block 14A, Zhonghaixin Science &Technology Park, Longgang District, Shenzhen, China Factory Add: 2/F, Block F, Internet & Creativity Industrial Park, No.24 Tangjiao Rd, Changping Town, Dongguan, China...