Brecknell BS-180 Instruction Manual

For the purpose of proper use and maintenance of the bathroTTom scale please read these instructions complete
before operating.

SPECIFICATION

Equipped with high precision "strain-gauge" sensor
Plastic platform with chrome plate surrounding the scale
Capacity: 5kg-180kg/396lb/28st
Graduation: D=0.1kg/D=0.2lb/D=1/4lb
UNIT:KG/LB/ST
LCD Display
With Blue Backlight
Auto-on
Auto-off function

Overload indicator

Low battery indicator

POWER

Battery: 3xAAA batteries (Not included)

OPERATION

Before using the scale for the first time, please remove the battery insulating strip to power up the scale.
Place the scale on a hard, flat surface to ensure the greatest accuracy and reliability. Stand on the scale and
start to weigh. When the weight is locked, the figure will flash so you can read it (press the switch on the bottom of
the scale to change between KG, LB and ST).

C FUNCTION

The 'C' function gives an indication to the user that an inaccurate reading has been taken. If a C appears on the
display, please step off the scale, wait for the scale to zero and then re-weigh.

AUTO OFF

When you step off the scale it will automatically switch off. If a weight is showed after zero is displayed the scale will
also automatically switch off after approximate 8 seconds. When the weight is locked, it will remain on display for 10
seconds and then the scale will automatically switch off.
OVERLOAD INDICATOR
When the scale is overloaded (over 180kg) "oL" will be displayed on the LCD. Please remove the weight
immediately to avoid damage to the scale.
LOW BATTERY INDICATOR
When the battery power is low the scale will display "Lo" on the LCD screen. Please replace the battery.
Brecknell
BS-180 BATHROOM SCALE INSTRUCTION MANUAL
ly