Table of Contents
Advertisement
Installation Instructions (Continued)
6. Electrical Connection
Check that the installation complies with the standards of local building, gas
and electrical authorities. Before connecting your rangehood to the mains supply,
ensure that the mains voltage corresponds to the voltage on the rating plate
inside the cooker hood.
7. Installation of the telescopic flue piece covers
Separate the inner and outer flue covers.
• Carefully remove the protective plastic coating from the flue pieces
(if present), being careful not to distort the shape of the flue pieces.
• Carefully reassemble the upper and lower flue covers sections by sliding
the inner into the outer flue cover.
• Carefully lower the assembled upper and lower flue covers onto the top
of the cooker hood body, and insert the flue cover into the cooker hood body
approximately 5mm.
• Fix the upper flue cover to the wall mounting bracket with screws supplied.
Ensure that the upper section is extended. The upper flue piece will be the
inner cover.
Figure 5
8. Your rangehood is now ready for use.
14
Advertisement
Table of Contents
