Gree G17-12PACSH-CA Owner's Manual page 27

BEFORE YOU CALL
In some cases, problems can be solved easily without the help from the Customer Service
department just by checking the following. If the problem still persists after you check the following,
then contact the Customer Service department.
Malfunction Code
CODE
H8
Chassis is full of water.
F1
Malfunction of temperature sensor.
Malfunction of evaporator temperature
F2
sensor.
1.Refrigerant is leaking
F0
2.System is blocked
H3
Overload protection for compressor
E8
Overload malfunction
Outdoor tube temperature sensor is
F4
open/short-circuited.
E5
Overcurrent protection
IF THESE SOLUTIONS FAIL, PLEASE CALL 1-866-658-0466 FOR GREE CUSTOMER SERVICE
PROBLEM
27
SOLUTION
1. Pour out the water inside chassis.
2. If "H8" still exists, please contact
Customer Service.
Please contact Customer Service.
Please contact Customer Service
1. Turn unit off, pull out power plug. Wait
30 minutes.
2. Plug unit in and turn on.
3. If code still appears, please contact
Customer Service.
1.Check if the unit is within high-
temperature, high-humidity environment. If
outside temperature or humidity is too high,
turn off unit. Wait until outside temperature
drops to under 95˚F (35˚C).
2. Check if the evaporator and condenser
are blocked. If yes, remove objects. Turn
unit off.
3. Wait 30 minutes.
4. If code still appears, please contact
Customer Service.
Please contact Customer Service.
1. Turn unit off, pull out power plug. Wait
10 minutes.
2. Plug unit in and turn on.
3. If code still appears, please contact
Customer Service.