Paitec MX11000 User Manual page 14

2. Open the safety cover of the feeding unit. The tray will go down.
3. When the feed tray is down to the bottom, loosen the green knobs on both paper
guides.
4. Load the aligned forms onto the feed tray and adjust the paper guides so they
are gently covering the sides of the stacked forms.
5. Tighten back the green knobs on both paper guides.
6. Once loading is complete, please close the safety cover. The feed tray will go
up.
Caution
- Poor quality forms may cause frequent paper jams.
- Make sure the paper guides are not set narrower or wider than the width of
the paper.
Reference
- When the forms are fed into the machine, all forms go to the upper
cassette and then to the lower cassette.
- Please refer to the images below to understand more about the path in
which the forms are folded.
Caution
- Please do not place any
objects that may cover the
sensor as indicated in the
picture.
Good
- 13 -
MX11000 User Manual
Bad