Table of Contents
Advertisement
OPERATION CONTROLS & FUNCTIONS
Front Panel - RECEIVER
q ISP PINHOLE:
This button is reserved for factory use only.
w STD/UPDATE SWITCH:
Note: This should be left on the default setting of "STD" for normal operation.
e RS-232 PORT:
Connect to a PC, laptop, or serial controllable device for the extension of RS-232
signals between both ends of the HDBaseT™ connection.
r POWER LED:
This LED will illuminate to indicate the unit is on and, receiving power.
SYNC LED:
This LED will illuminate when a live input source is detected.
This switch is reserved for factory use only.
6
Advertisement
Table of Contents
