ERROR MESSAGES AND TROUBLESHOOTING
Self Test Startup Error:
• If the thermometer determines an error during the
self-test phase after activation, "Er" is displayed and
3 short acoustic signals are emitted; the device then
switches off after 10 seconds.
If this occurs, remove the batteries and wait a few
minutes before replacing them in the device. Attempt
to activate the device again. If the error message should
appear again, contact a local dealer.
Low Battery Errors:
• If the batteries are low, the battery symbol appears.
Please change the batteries as quickly as possible.
• If the voltage falls below
the required power value,
the thermometer displays a
battery symbol after press-
ing the POWER button.
• If the batteries are com-
pletely discharged, nothing will appear on the display
after pressing the POWER button. Replace the batteries.
See the Changing the Batteries section for more.