Table of Contents
Advertisement
2.5
Burner set
The burner set is a vital part of the heater. Its function is to light the oil coming out of the nozzle, and it
must be capable of doing so under adverse conditions. It is therefore very important that it is properly
adjusted. If the burner set is badly adjusted, the ignition spark
may form in the wrong place or may not form at all. This will
cause the heater to lock out.
When the heater is activated, it is possible to see that the burner
set system starts operating. Between the two ignition electrodes
a well-defined spark should be visible.
Under the influence of the air current, the spark should form in
front of the nozzle. If a strong spark is visible and it is in the right
place, the burner set should function properly.
Carefully adjust the ignition electrodes. If the porcelain sleeve of
the electrode breaks or cracks, the whole electrode needs to be
replaced.
Pos.
Name
⅛ x 6mm coupling 90º screw-in
1.
2.
Magnetic valve
3.
Ignition electrodes
4.
Mounting plate
5.
Nozzle block
6.
Nozzle
7.
Burner disk
14
Item nr.
560056
100019
490054
100028
(See 2.6)
490057
V16 HHO SERIES
Advertisement
Table of Contents
