Operation - Klarstein BERNADIN Manual

EN
50

OPERATION

• When the power is turned on, the screen displays "12:00" and the clock icon
flashes 6 times. At this time, the oven is not working. After 6 seconds the flashing
stops. After 5 minutes without any operation, the oven will turn off automatically.
• Press and hold the ON/OFF button
standby mode.
Setting the Clock
Used to display the current time on the screen. The clock must be set before use.
• When the power is turned on, press the TIME button
screen. Now press the UP
3 seconds "min" flashes on the screen
• Press the UP or DOWN
will confirm the set time and the flashing stops.
Setting the Heating Mode
• Press the FUNCTION button
program heating mode. The screen displays either
(automatic program heating mode).
• After choosing the function heating mode or automatic program heating mode,
press the UP or DOWN
the CONFIRM button
to confirm, it will confirm automatically after 3 seconds.
• After selecting the heating mode, press the TEMPERATURE button
temperature tube on the screen flashes. Press the UP
set the temperature you want.
NOTES:
– Press the TEMPERATURE button
switch between Celsius (°C) and Fahrenheit (°F).
– When using the defrost heating mode
No temperature is shown on the screen, and the temperature cannot be set.
The heating icon
for 3 seconds, the appliance will go to
or DOWN button to set the current hour, after
button to set the current minutes. After 3 seconds, it
to enter the function heating mode or automatic
button to select the heating mode you want. Press
to confirm the heating mode. If you don't press this button
and the LIGHT button
, it will show "
is shown, when the oven is heating.
once, "h" flashes on the
(function heating mode) or
, and the
or DOWN button to
at the same time to
" on the screen.