Page 1
ECAT-2057-32 Quick Start v1.1, Sep. 2019 Shipping Package This shipping package contains the following items 1 x ECAT-2000 module 1 x Quick Start (This Document) Connecting the Power and Host device Switch on module and connect it to an EtherCAT network ...
Page 2
The latest ESI file (ICPDAS ECAT-2000.xml) can be downloaded from ICP DAS web site at http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/ Install the ESI file Copy the “ICPDAS ECAT-2000.xml” file to the Master Tools installation folder, as indicated in the table below. Software Default Path...
Page 3
2 complete. Insert the wire Remove the wire Wire Diagrams Source Output Type ON State OFF State Readback as 1 Readback as 0 Ext.PWR Ext.PWR Drive Relay Ext.GND Ext.GND Load Load Ext.PWR Ext.PWR Resistance Ext.GND Ext.GND Technical support: service@icpdas.com...
Page 4
Click Output 0 to 7and click Output 0 to 7[0] in the left-hand window. Click online in the right-hand window. Click Write. Click 1 (Configure DO0 to Logic1). LED is lighting. Related Information Product Page: http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/ethercat/io_module/ecat-2057-32.html Documentation: ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/ ESI file: http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/ MDR-20-24 (Optional) Product Page: http://www.icpdas.com/products/Accessories/power_supply/power_list.htm Technical support:...
Need help?
Do you have a question about the ECAT-2057-32 and is the answer not in the manual?
Questions and answers