Napa Carlyle DATA12 Manual page 9

Angle value
In angle mode, the LCD displays the angle
•
rotated. The angle is counted after the rotation
torque has been reaching over 5% of the rated
maximum torque.
After releasing force, the LCD shows the
•
maximum angle and the maximum torque.
(alternatively)
STEP 10: SAVE TORQUE/ANGLE VALUE OR CLEAR
MAXIMUM VALUE
Peak mode
In P-mode, after releasing force, the LCD shows
•
the maximum value. (flashing)
Press to clear the maximum torque and that
•
will return to the target torque.
Press record the maximum torque and,
• to
then it will clear and go back to show the target
torque.
Angle-mode
In angle mode, after releasing force, the LCD
•
shows the maximum angle and the maximum
torque (alternatively).
Press clear the maximum angle and go
• to
back to show the target angle.
Pressing will record the maximum angle, then
•
clear it and go back to show the target angle.
STEP 11: BACK TO STEP FOR NEXT OPERATION
DATA12, DATA14, DATA38
EX. For a 30.00Nm adaptor, 5% is 1.5Nm
No
force
1.5 Nm
Continuously
applying
force
Release
force
Maximum torque
Show rec (record) and Its number
M
Maximum angle and torque (alternatively)
Show rec (record) and Its number
9
M
Target angle
Start to count angle
N-m
P
Target torque
Target torque
N-m
P
Target angle
Target angle
N-m
N-m
M P
N-m
M P
M
M
Rev. 02/15/12