Maintenance And Storage - Napa Carlyle DATA12 Manual

MAINTENANCE AND STORAGE

ATTENTION:
One-year periodic recalibration is necessary to
maintain accuracy.
Please contact your local dealer for calibration.
CAUTION
1. Over-torque (110% of Max. torque range)
could cause breakage or lose accuracy.
2. Do not shake violently or drop wrench.
3. Do not use this wrench as a hammer.
4. Do not leave this wrench in any place
exposed to excessive heat, humidity, or direct
sunlight.
5. Do not use this apparatus in water. (not
waterproof)
6. If the wrench gets wet, wipe it with a dry
towel as soon as possible. The salt in
seawater can be especially damaging.
7. Do not use organic solvents, such as alcohol
or paint thinner when cleaning the wrench.
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand as
this could cause serious damage.
10. Do not apply excessive force to the LCD
panel.
11. Apply torque slowly and grasp the center of
the handle. Do not apply load to the end of
handle.
BATTERY MAINTANCE
1. When the wrench is not used for an extended period
of time, remove the battery.
2. Keep a spare battery on hand when going on a long
trip or to cold areas.
3. Do not mix battery types or combine used batteries
with new ones.
4. Sweat, oil and water can prevent a battery's terminal
from making electrical contact. To avoid this, wipe
both terminals before loading a battery.
Dispose of batteries in a designated disposal area. Do
not throw batteries into a fire.
DATA12, DATA14, DATA38 14 Rev. 02/15/12