Setting Parameters; Water Hardness; Water Filter - Java Pro Capsule System Original Operating Manual

Setting parameters:

EN

water hardness

For an overview for determin-
ing the degree of water hard-
ness, see page 52.
Water hardness Display of symbols
hard
medium
soft
To abort the setting process
press the on/o button.
The set water hardness and
the water filter determine the
quantity of water used before descal-
ing:
Water Water consumption [L]
hardness without / with water filter
hard 40
medium 80
soft 120
Setting parameters:
EN
water filter ( I )
Water filter Display of symbols
o
on
Factory setting:
No water filter (o )
22
1
The machine must be
switched o : press the "on/
o button briefly.
4
400
800
Press the "espresso" button
repeatedly and briefly until
1200
the required water hardness
setting is displayed.
1
The machine must be
switched o : press the "on/
o button briefly.
2
Off
Press the "espresso" and on/
o buttons together.
5
3 sec. min.
Press the "espresso" button
for at least 3 sec. to store the
setting.
2 8
Off
Press the milk and on/o but-
tons together.
3
The current water hardness
is shown on the display (see
table).
6
As confirmation, all cup sym-
bols will flash once.
11 3
The current setting is shown
on the display (see table).