Table of Contents
Advertisement
Chapter 3
OnChip USB
This shoudl be Enabled if your system has a USB installed on the system
board and you wish to use it. If you want to add a higher performance controller,
you will need to disable this feature. Setting options: [Enabled] [Disabled].
Default value: [Enabled]
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have a USB keyboard. Setting options: [Enabled] [Disabled]. Default
value: [Enabled]
AC97 Audio/MC97 Modem
[Auto] allows the motherboard's BIOS to detect whether you're using any
audio/modem device. If it is, the onboard modem/audio controller will be
enabled. If not, the onboard modem/audio controller will be disabled. If you
want to use different controller cards to connect modem and audio connectors,
set these fields to [Disabled]. Setting options: [Auto] [Disabled]. Default
value: [Auto]
FDD Controller
This item allows you to enable or disable the onboard FDD controller. Setting
options: [Enabled] [Disabled]. Default value: [Enabled]
Serial Port A/B
Select an address and corresponding iterrupt for the serial port A and B. Set-
ting options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]
Default value:[Auto]
3-16
Advertisement
Chapters
Table of Contents
