Table of Contents
Advertisement
Hardware Setup
Fan Power Connectors: CPU FAN/SYSFAN
The CPUFAN (processor fan) and SYSFAN (system fan) support
system cooling fan with +12V. It supports three pin head connector. When
connecting the wire to the connector, always take note that the red wire is
the positive and should be connected to the +12V, the black wire is Ground
and should be connected to GND. As the mainboard has a System
Hardware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.
SENSOR
+12V
GND
CPU FAN
SENSOR
+12V
GND
SYSFAN
·
Note:
1. Always consult the vendor for proper CPU cooling fan.
2. CPU Fan support the fan control. You can install the PC Alert utility
that will automatically control the CPU Fan speed according to the
autual CPU temeperature.
2-19
Advertisement
Chapters
Table of Contents
