Table of Contents
Advertisement
Chapter 3
External Cache
This allows you to choose from the default of [Enabled] or choose [disabled]
to control the function of level 2 cache memory. Setting options: [Disabled]
[Enabled]. Default value: [Enabled].
Quick Power On Self Test
This allows you to speed up Power On Self Test (POST) after you power on
the computer. If this is set to Enabled, BIOS will shorten or skip some check
items during POST. Setting options: [Disabled] [Enabled]. Default value:
[Enabled].
First/Second/Third/Boot Other Device
This allows you to set the sequence of boot device from that the BIOS at-
tempts to load the operating system. Setting options: [Floppy] , [LS120] ,
[HDD-0] , [HDD-1] , [HDD-2] , [HDD-3] , [SCSI] , [CDROM].
Swap Floppy Drive
This allows yo to choose from the default of [Disabled] or choose [Enabled] to
switch the floppy disk drives between being designated as A and B. Setting
options: [Disabled] [Enabled]. Default value: [Disabled]
Boot Up NumLock Status
This allows you to set the NumLock status when you boot up your
computer. When you choose from the default of [On], the keypad is numeric
keys. When you choose [Off], the keypad is arrow keys. Setting options:
[On] [Off]. Default value: [On]
3-10
Advertisement
Chapters
Table of Contents
