Download Print this page
Hannlomax HX-202Qi Manual

Hannlomax HX-202Qi Manual

Pll alarm clock radio with wireless qi charger, usb port for charging, mp3 playback and bluetooth

Advertisement

Quick Links

PLL ALARM CLOCK RADIO WITH WIRELESS QI CHARGER,
USB PORT FOR CHARGING, MP3 PLAYBACK AND BLUETOOTH
Model : HX-202Qi
(Bluetooth pairing code: HX-202Qi HANNLOMAX)
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
14. Unplug this apparatus during lightning storms or when unused for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
SPECIFICATIONS
Frequency Range:
FM 87.5 – 108 MHz
Power Supply:
AC 100-240V ~ 60/50 Hz
Rated Output
DC9V / 3.5A
Backup Battery:
CR2032 X 1 pc
Specifications are subject to change without prior notice.
-1-
LOCATION OF CONTROL
LCD DISPLAY
1
Phone Support ( for Qi charging)
2
STANDBY BUTTON
3
VOL + BUTTON
4
TIME/M+/+10 BUTTON
5
FUNC BUTTON
6
VOL – BUTTON
7
ALARM ON/OFF BUTTON
8
SNOOZE / DIMMER BUTTON /
NIGHT LIGHT
9
/ FM SCAN/ BT UNPAIR Button
10
PRESET / ■ BUTTON
11
SKIP+/TU+/ LIGHT + BUTTON
12
TIME ZONE BUTTON
13
SLEEP/TEMPERATURE BUTTON
14
SKIP-/TU-/LIGHT- BUTTON
15
LCD DISPLAY
16
USB PORT FOR CHARGING (1A)
17
Wireless Charging Status Indicator
18
USB PORT FOR CHARGING (1A) AND
PLAYBACK
19
Speaker
20
FM Antenna
21
DC JACK
22
AUX-in JACK
23
BACKUP BATTERY COMPARTMENT
24
TEMPERATURE SENSOR
-2-

Advertisement

loading
Need help?

Need help?

Do you have a question about the HX-202Qi and is the answer not in the manual?

Questions and answers

Summary of Contents for Hannlomax HX-202Qi

  • Page 1 NIGHT LIGHT / FM SCAN/ BT UNPAIR Button PRESET / ■ BUTTON Model : HX-202Qi SKIP+/TU+/ LIGHT + BUTTON TIME ZONE BUTTON (Bluetooth pairing code: HX-202Qi HANNLOMAX) SLEEP/TEMPERATURE BUTTON IMPORTANT SAFETY INSTRUCTIONS SKIP-/TU-/LIGHT- BUTTON Read these instructions. LCD DISPLAY Keep these instructions.
  • Page 2 CONNECTING THE UNIT TO POWER SETTING THE CLOCK AND DATE AC OPERATION 1. You can only set the Clock and Date when the unit is in STANDBY mode, Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC wall outlet. ( When the unit is in STANDBY mode, there will be NO function modes) Before switching on the unit, make sure that the voltage of your electricity supply is the same on the rating 2.
  • Page 3 2. After the full scan, the radio will automatically store the first 20 FM “HX-202Qi HANNLOMAX”. Select this for connection. stations as presets for instant access to your favorite stations. If connection is successful, your Bluetooth device will show Bluetooth is connected.
  • Page 4 2. WIRELESS CHARGING Place a supported mobile device on the phone support. Check the charging icon displayed on the mobile device’s screen for the charging status. While charging, the Qi indicator will be RED. (Andriod Phones and Apple Phones) Fully charged: the Qi indicator will be WHITE for some specific Andriod phones.