Hannlomax HX-116CR Instruction Manual

PLL ALARM CLOCK RADIO
Model : HX-116CR
INSTRUCTION MANUAL
ELECTRIC SHOCK
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
Warning: To reduce the
intended to alert the user to
rise of electric shock, do
the presence of uninsulated
not remove cover (or
"dangerous voltage" within
back)
the products enclosure that
user-serviceable
may be of sufficient
inside. Refer servicing
magnitude to constitute a
to
risk of electric shock to
personnel.
persons.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
12) Unplug the apparatus during lightning storms or when unused for long
periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
FCC NOTICE
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
PLL ALARM CLOCK RADIO
Model : HX-116CR
INSTRUCTION MANUAL
ELECTRIC SHOCK
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
Warning: To reduce the
intended to alert the user to
rise of electric shock, do
the presence of uninsulated
not remove cover (or
"dangerous voltage" within
back)
the products enclosure that
user-serviceable
may be of sufficient
inside. Refer servicing
magnitude to constitute a
to
risk of electric shock to
personnel.
persons.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
12) Unplug the apparatus during lightning storms or when unused for long
periods of time.
13) Refer all servicing to qualified service personn
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
FCC NOTICE
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION
RISK OF
The exclamation point
DO NOT OPEN
within an equilateral triangle
is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in
no
parts
the literature accompanying
the appliance.
qualified service
CAUTION
RISK OF
The exclamation point
DO NOT OPEN
within an equilateral triangle
is intended to alert the user
to the presence of important
operating and maintenance
no (servicing) instructions in
parts
the literature accompanying
the appliance.
qualified service
el. Servicing is required when the apparatus

QUICK REFERENCE

1. SPEAKER
2. SOURCE / AL. OFF
Use this button to select AM or FM band.
Use this button to turn the ALARM off after Alarm activates.
3. TIME / M+ / MEM
In CLOCK mode, use this button to set the clock
In RADIO mode, use this button to store radio stations in the memory.
In RADIO mode, use this button to select the stored radio stations in the memory.
4. AL2 / VOL-
In CLOCK mode, use this button to set the alarm time in ALARM 2.
In RADIO mode, use this button to decrease the volume.
5. AL1 / VOL+
In CLOCK mode, use this button to set the alarm time in ALARM1.
In RADIO mode, use this button to increase the volume.
6. MIN /
In CLOCK mode, use this button to adjust the minute in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in backward direction.
7. HR /
In CLOCK mode, use this button to adjust the hour in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in forward direction.
8. SNOOZE / SLEEP
In ALARM mode, use this button to temporarily suspend the ALARM for a short period.
In RADIO mode, use this button to set the sleep time.
9. LED DISPLAY
10. PM INDICATOR
11. AL1-B INDICATOR (This indicator shows that the unit is in ALARM-1 buzzer mode.)
12. AL1-R INDICATOR (This indicator shows that the unit is in ALARM-1 radio mode.)
13. AL2-B INDICATOR (This indicator shows that the unit is in ALARM-2 buzzer mode.)
14. AL2-R INDICATOR (This indicator shows that the unit is in ALARM-2 radio mode. )
15. BATTERY COMPARTMENT (Compartment for the back-up battery.)
16. FM WIRE ANTENNA(Extent this wire antenna to obtain better FM broadcasting.)
17. DC JACK (Connect the unit to the AC/DC adaptor.)
QUICK REFERENCE
1. SPEAKER
2. SOURCE / AL. OFF
Use this button to select AM or FM band.
Use this button to turn the ALARM off after Alarm activates.
3. TIME / M+ / MEM
In CLOCK mode, use this button to set the clock
In RADIO mode, use this button to store radio stations in the memory.
In RADIO mode, use this button to select the stored radio stations in the memory.
4. AL2 / VOL-
In CLOCK mode, use this button to set the alarm time in ALARM 2.
In RADIO mode, use this button to decrease the volume.
5. AL1 / VOL+
In CLOCK mode, use this button to set the alarm time in ALARM1.
In RADIO mode, use this button to increase the volume.
6. MIN /
In CLOCK mode, use this button to adjust the minute in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in backward direction.
7. HR /
In CLOCK mode, use this button to adjust the hour in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in forward direction.
8. SNOOZE / SLEEP
In ALARM mode, use this button to temporarily suspend the ALARM for a short period.
In RADIO mode, use this button to set the sleep time.
9. LED DISPLAY
10. PM INDICATOR
11. AL1-B INDICATOR (This indicator shows that the unit is in ALARM-1 buzzer mode.)
12. AL1-R INDICATOR (This indicator shows that the unit is in ALARM-1 radio mode.)
13. AL2-B INDICATOR (This indicator shows that the unit is in ALARM-2 buzzer mode.)
14. AL2-R INDICATOR (This indicator shows that the unit is in ALARM-2 radio mode. )
15. BATTERY COMPARTMENT (Compartment for the back-up battery.)
16. FM WIRE ANTENNA(Extent this wire antenna to obtain better FM broadcasting.)
17. DC JACK (Connect the unit to the AC/DC adaptor.)